angle seat valve
FLUXA YAD
- High-end performance in limited space
- Functional design for multi-unit installation
- Special spacer to protect the cylinder from incompatible fluids
- Closing-against-flow type to avoid water-hammer
- Special shutter available for vacuum applications
- Max temperature +100 C°
- 360° swiveling cylinder (no wrench needed)
Type
Compact angle-seat 2 way valve
Brass body
Brass body
Advantages
• Compact design allowing install in reduced space plants
• Versatile design allowing multi-unit installation
• Maximum versatility of use with spacer to protect the cylinder from non-compatible fluids
Applications
The Fluxa YAD valve is very versatile thanks to the special spacer that protects the aluminum cylinder from aggressive fluids. We recommend in any case to check compatibility on our chemical Compatibility Chart and contact our technical department.
For vacuum applications, a special dedicated shutter is available.
For vacuum applications, a special dedicated shutter is available.
Certifications
ATEX
Tech Specs
| Name | FLUXA YAD |
|---|---|
| Type | Angle seat valve |
| Size | 1/2" – 1” (PN16) |
| Pipe threads | F/F gas ISO228 |
| Available actuator type | Normally Closed NC, Normally Open (NO) Double acting (DA) |
| Flow type | 1/2" e 3/4" Unidirectional Flow 1→2; 1” Bidirectional |
| Ambient temperature | -20°/+60°C |
| Pilot pressure | Min 4.0 bar – Max 8.0 bar |
| Valve body | Brass |
| Spacer | Brass |
| Rotable cylinder | Yes |
| Seal holder | Brass |
| Piston | Aluminium |
| Cylinder | Anodized aluminium |
| Piston rod | Stainless steel Aisi 304 |
| Rod wiper | Yes |
| Rod guide | No |
| O ring interni / Internal o ring | FKM |
| Guarnizione otturatore / Shutter seal | FKM |
| UPON REQUEST | |
| Atex Certification | |
| PTFE or EPDM shutter seal | |
Similar to FLUXA YAD
Previous
Next