ANGLE SEAT VALVES
Selub Y Valve
Compatible Fluids
Angle seat valves by Maros Engineering
Our valves with angled seat and right angled seat are available in numerous sizes, materials, versions and above all they can be customized.
In fact, if a company needs a customized product, it is possible to contact our technicians, who will be able to find the right solution for every need.
Advantages of angle seat control valves
Angle seat control valves are the ideal solution when solenoid valves are unsuitable for tasks. They are fitted in areas where very large flow rates are required and can operate from zero differential pressure, where high viscosity materials are used and in conjunction with dirty media
The angle seat valves can be equipped with switch boxes and can also be offered in Atex execution – 2014/34 / UE.
Despite the characteristics indicated in the data sheet of each valve, for greater safety we invite you to contact our technical office. In this way it will be possible to verify the compatibility of the fluid, or to find a more suitable valve.
Check out our installation manual.
Products range
The angle seat valves we can offer, all designed and realized in our factory, are: Srt, Srx, Fluxa yad, Fluxa ycxa, selub y, nry and the modulating valve.
Srx valve: The Srx angle seat valves have a bidirectional flow and an optimize internal passage. This valve is suitable for high temperature fluid and steam. The body of the valve is made of inox aisi 316, like the seal holder. The sizes of this valves are avaliable from 1/2″ to 2”.
Srt valve: similar to the previous valve, the main difference concerns the materials.
Srt valve is made of brass, and the actuator is made of anodized aluminum. The sizes of this valve are the same of the srx, from 1/2″ to 2”. Srt valve is suitable for high temperature fluids and steam too.
Fluxa yad valve: compact 2-way pneumatic angle seat valve, suitable for fluids. IF yiu are not sure about the fluid, we invite you to ask to our technical office. Thanks to the fluid passage under the shutter, fluxa yad avoids water hammer in the system.
This is a very small solution, helpful for all the situations with small spaces.
Fluxa ycxa valve: compact 2-way angle seat pneumatic valve. The main features of this valve are the body, made of stainless steel and the actuator, made of nickel-plated aluminum.
This valve is suitable for fluids compatible with aluminum, but we alsways suggest you to check the compatibility table or to contact our techical office. For this valve, we can proved a special version for vacuum.
Selub y valve: 2 way pneumatic valve with self-lubricated system. This valve is generally used for standard fluids, but it could be also suitable for different fluids.
Nry valve: 2way angle seat control valve, suitable for non-extreme performance and environments. The maximum fluid temperature is 80°C.
And last but not least, the modulating valve: our last valve, designed and realized by Maros. This valve is suitable for a maximum fluid temperature of 187°C. The Working pressure of the moduating valve is minimum 5.5 bar and maximum 8 bar.