angle-seat valves
FLUXA Ycxa
- Stainless steel body
- High-end performance in limited space
- Functional design for multi-unit installation
- Special brass spacer to protect the cylinder from incompatible fluids
- Closing-against-flow type to avoid water-hammer
- Max temperature +100 C°
- 360° rotable cylinder (no wrench needed)
Type
Compact angle-seat 2 way valve
Aisi 316 Stainless Steel body
Aisi 316 Stainless Steel body
Advantages
• Compact design allowing install in reduced space plants
• Versatile design allowing multi-unit installation
• Maximum versatility of use with spacer to protect the cylinder from non-compatible fluids
Applications
The Fluxa YCXA valve is suitable for installations requiring frequent external sanitising washings We recommend in any case to check compatibility on our chemical Compatibility Chart and contact our technical department.
Certifications
ATEX
Tech Specs
| NAME | FLUXA YCXA |
|---|---|
| Type | Angle seat valve |
| Size | 1/2" – 1” (PN40) |
| Pipe threads | F/F gas ISO228 |
| Actuator type | Normally Open (NO) Double acting (DA) |
| Flow | Unidirectional flow 1→2 |
| Ambient temperature | -20°/+60°C |
| Pilot pressure | Min 4.0 bar – Max 8.0 bar |
| Valve body | Stainless steel Aisi 316 |
| Spacer | Yes |
| Rotable cylinder | Yes |
| Seal holder | Stainless Steel |
| Piston | Aluminium |
| Cylinder | Nickel-plated aluminium |
| Piston rod | Stainless steel Aisi 304 |
| Rod wiper | Yes |
| Rod guide | No |
| Internal o ring | FKM |
| Shutter seal | FKM |
| UPON REQUEST | |
| Atex Certification | |
| PTFE or EPDM shutter seal | |
Similar to FLUXA YCXA
Previous
Next