valves for steam and high temperature fluids
SRT valve
SRT
- Max fluid temperature +187 C°
- Brass body
- Suitable for heavy-duty and high-frequency use
Type
Pneumatically actuated angle seat piston valve with brass body, suitable for heavy duty and high frequency service.
Advantages
- Valve status indicator
- Design suitable for multiple unit mounting
- Cylinder can be rotated 360°
- Cylinder can be rotated without the use of a wrench
- Optimized performance up to 10M cycles*.
*tests performed by MAROS engineering
Applications
SRT valve is suitable for any plant involving flow control of fluids and steam of various kinds at high temperature. Please check our Compatibility Chart between the fluid used in your application and materials used in the valve.
Certifications
ATEX
Tech Specs
| Name | SRT |
|---|---|
| Type | Angle seat valve |
| Size | 1/2" – 2” (PN16) |
| Pipe threads | F/F gas ISO228 |
| Actuator type | Normally Closed NC Normally Open (NO) Double acting (DA) |
| Flow type | Bidirectional |
| Ambient temperature | -20°/+80°C |
| Pilot pressure | Min 4.0 bar – Max 8.0 bar |
| Valve body | Brass |
| Rotable cylinder | Yes |
| Seal holder | Brass |
| Piston | Aluminium |
| Cylinder | Anodized aluminium |
| Piston rod | Aisi 304 stainless steel |
| Rod wiper | Yes |
| Rod gasket | Spring loaded V-Ring seal |
| Shutter seal | PTFE |
| Valve status signal | Red plug indicator (only NC) |
| UPON REQUEST | |
| Atex Certification | |
| Inductive sensor switch box | |
| Cylinder Nickel-plating (Niploy Process) | |
| Valve body Nickel-plating (Niploy Process) | |
| Seal holder Nickel-plating (Niploy Process) | |
| FKM or EPDM shutter seal | |